Skytrax 200 - No Winds / Temps aloft data

At work I was flying with a guy that has a Sentry, he could share the data coming in with me on my iPad.  The WX display was fast, could pull up winds & temperature aloft, with streakline representation on ForeFlight.

Why cannot I get this info through the Skytrax?  I was on a trip from San Diego area to the San Francisco Bay Area and could not get this information in either direction.  We were up around 11500' on average and getting all other ADSB data, EXCEPT winds & temps.  It would have been very helpful as I was trying to figure out what would be the winds at lower or higher altitudes.  Very frustrating.  Any help would be greatly appreciated.

Will have to check which port - directions to do that would be appreciated

Yes, it is connected to the network created by the IFD as it is getting traffic information on both the IFD 100 program and ForeFlight, and both can send flight plans and other stuff to the IFD 440

Could this be settings need to be set in the SkyTrax 200?

Thank you for your assistance. 

Main ARINC 429 Config:

          Speed                Data

In 1    Low                Honeywell EFIS

In 2    Low                    Off

Out 1  Low                    GAMA 429 Graphicsw/int

SDI     LNAV 1

VNAV  Enable Labels

Main RS232 Config:

                  Input                                Output

CHNL 1       Off                                   ADS-B (Avi)

CHNL 2       Icarus-alt                         ADS-B+ (G2)

CHNL 3.      Capstone HS Trfc+Wx.       Capstone HS Trfc+Wx        

CHNL 4.      Shadin-fadc                      Aviation

Thanks for your help