Aural Warnings
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=625
Printed Date: 26 Jun 2024 at 7:43am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Aural Warnings
Posted By: rolfe_tessem
Subject: Aural Warnings
Date Posted: 05 Apr 2015 at 12:07pm
|
I just got some install glitches resolved this past week, so am just now getting around to some practice approaches for real. I don't seem to be getting FLTA aural warnings, but I am getting the TOD chime. Does this audio come from the same output? Is is possible I've just overlooked a config setting? FLTA is displayed on the screen, of course. Incidentally, my install glitches were due to a funky 530 tray. Once we substituted a new one, everything seems to be resolved. Symptoms were intermittent loss of GPS lock. I mention it in case anyone else is having that problem for unexplained reasons.
|
Replies:
Posted By: oskrypuch
Date Posted: 05 Apr 2015 at 12:32pm
|
It is the same audio output line. I have never heard a FLTA aural warning, lots of big blue and some yellow triangle objects, but never a red -- but I've never purposely flown at a tower, or something similar. ;-)
* Orest |
Posted By: rolfe_tessem
Date Posted: 05 Apr 2015 at 1:52pm
|
Orest, I just assumed that the aural warnings mirrored the on-screen ones -- apparently not! So, you only get an aural warning for red? Rolfe |
Posted By: rolfe_tessem
Date Posted: 05 Apr 2015 at 4:17pm
|
I just re-read the applicable section of the manual several times, and it is still not clear to me when one gets an aural warning in addition to the visual warning. I think this section could use come clarification. Rolfe |
Posted By: Bad1996
Date Posted: 05 Apr 2015 at 5:30pm
|
What was funky about the 530 tray ? Anything that can be visually recognized ? |
Posted By: rolfe_tessem
Date Posted: 05 Apr 2015 at 6:29pm
|
Bad1996, not exactly. We found that the the 540 was an *extremely* tight fit in my existing 530 tray. So tight that my installer called Avidyne to talk about it. The 530 is a looser fit, with a bit of wiggle room. We eventually got the 540 in the tray, with a lot of effort, but the subsequent flights led to loss of GPS lock. They could be resolved temporarily by manipulating the locking screw in or out, which led us to suspect the tray. I had bought another new 530 tray to sell with my 530 and so we reinstalled the 540 with that tray. It was now a glove fit -- still tight, but it slid in smoothly. That resolved all the problems. Our feeling is that the initial problems with GPS lock were caused by a slightly deformed 530 tray which never caused a problem with the 530 because of its slightly looser fit and therefore slightly greater tolerance. Rolfe Edit: For clarification, the GPS lock failures were with 10.0.2 installed. We installed 10.0.3 with the tray swap. |
Posted By: AviJake
Date Posted: 06 Apr 2015 at 9:41am
Presuming FLTA is turned On in the User Options page (it defaults to on at every power application) and presuming your IFD540 audio output is wired to the audio panel, you should: 1. Get a terrain warning aural for every red FLTA Terrain Warning; and 2. Get a terrain caution aural for every yellow FLTA Terrain Caution; and 3. Get an obstacle warning aural for every red FLTA Obstacle Warning; and 4. Get an obstacle caution aural for every yellow FLTA Obstacle Caution. So that is four separate aural alerts that FLTA can generate. If you can hear one, then all wiring is correct and you'll hear any of those four that get triggered. ------------- Steve Jacobson sjacobson@avidyne.com |
rolfe_tessem wrote:Posted By: rolfe_tessem
Date Posted: 06 Apr 2015 at 11:22am
|
Steve, Thanks for that clarification! I assume that you agree with Orest's post above, that if I'm hearing the TOD chime, then the audio wiring is correct? Thanks, Rolfe |
Posted By: AviJake
Date Posted: 06 Apr 2015 at 11:26am
|
Yes, I agree with Orest. ------------- Steve Jacobson sjacobson@avidyne.com |
Posted By: compasst
Date Posted: 08 Jun 2015 at 9:33pm
|
Is there a way to test for aural alerts while on the ground and not in flight? I'm pretty certain that my aural alert audio is not working (I've not received TOD tones at the start of the GPS LPV approaches - but do hear them on the sim). The shop looked at things today and said they think it is OK, although they could not with certainty say which pin-out is for the alerts. What shall I tell them?
I have an avidyne AMX240 audio panel and would think the connections are already in the wiring from the factory - but maybe not. Thanks. |
Posted By: bneub111
Date Posted: 08 Jun 2015 at 10:49pm
|
My original installer didn't run the wires from the 540 to the audio panel for the aural alerts. Once they were added, I could hear terrain and TOD alerts. I don't know which pins they are, but Tech support could tell you or the shop. |
Posted By: oskrypuch
Date Posted: 09 Jun 2015 at 8:40am
Don't think so. However, 10.1 will reportedly provide an aural feedback, as you adjust the alert volume, which would serve that purpose. * Orest |
Posted By: AviSimpson
Date Posted: 09 Jun 2015 at 9:35am
Are you seeing the TOD icon on your route? Double check that TOD Aural Alerts is set to on in the AUX page as well. ------------- Simpson Bennett Avidyne Corporation Product Manager |