Setups: bezel/display lighting
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=529
Printed Date: 19 May 2024 at 8:18am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Setups: bezel/display lighting
Posted By: oskrypuch
Subject: Setups: bezel/display lighting
Date Posted: 27 Dec 2014 at 8:13pm
What are you doing with your lighting setup values. Here is what I've fiddled to ... What is YOUR setup, so far? * Orest P.S. I have changed the dimbus transition to 3% now.
|
Replies:
Posted By: AviJake
Date Posted: 28 Dec 2014 at 9:16am
|
One thought - I see you have the default value of 10 set for the dimBus Transition % parameter and you've selected "Photocell" for the lighting source. You might consider setting the dimBus Transition % value to 0 if you would like to avoid a potential rapid brightening of the display when flying into very dark situations. With your current 10 setting, as the ambient light gets very low, your display and bezel will get darker and darker and darker and then when 10% of ambient light is reached, the dimming bus will take over and could result in a rapid brightening. ------------- Steve Jacobson sjacobson@avidyne.com |
Posted By: oskrypuch
Date Posted: 28 Dec 2014 at 12:02pm
|
So, 0 completely remove the dimbus from control? The 10 seems to work, as when I wanted the panel lights on, the dimming happened to be about right. With the original Avicurve gave me a blast of bright, or sometimes a very dim screen when I didn't want it. I probably just had it set up wrong. Steve, can you post YOUR settings? I'm hoping others will as well. * Orest |
Posted By: oskrypuch
Date Posted: 08 Jan 2015 at 10:39pm
|
Anyone else for their lighting setups?? * Orest |