IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

Print Page | Close Window

WX 500 Ground track from IFD

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1940
Printed Date: 25 Apr 2024 at 2:50pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: WX 500 Ground track from IFD

Posted By: wehrhardt
Subject: WX 500 Ground track from IFD
Date Posted: 14 Feb 2020 at 5:13am

Hello, I have an IFD 540 with a G5 without a GAD29 (no Airnic 429) and want, that the WX 500 stromscope gets the ground track from the IFD, because the G5 does not send the heading to the IFD via RS232 (only via Airinc). The documentation from the WX500 says, that it is possible to get the ground track from the GNS 430. Does the IFD 540 do the same? Unfortunately is the WX500 complete misplaced in my aircraft and I must remove the whole WX500 in the fuselage (around 3 hrs work) to change the WX500 from Heading (xyz) via KI525a to RS232 from the GPS. So I want to know, if it is the work worth to change to “Heading track via RS232” (you must solder new cable bridges in the SUB-D plus).

Many thanks in advance and best regards from Germany with still no speed limit on the highway (the government decides today about a speed limit L )

-------------
Piper Aztec non turbo, IFD 540 and GNS430w, G600, EDM 790