IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM - Traffic on both IFD440 and Garmin Aera 660

Print Page | Close Window

Traffic on both IFD440 and Garmin Aera 660

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1510
Printed Date: 19 Apr 2024 at 6:55am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Traffic on both IFD440 and Garmin Aera 660

Posted By: Rocket Man
Subject: Traffic on both IFD440 and Garmin Aera 660
Date Posted: 10 May 2018 at 11:23pm

I have the IFD440 displaying traffic from a Garmin 345W. I also have a panel mounted Garmin Aera 660 portable and wish to display ADSB traffic on its dedicated traffic screen. The IFD440 screen can get very cluttered at times, especially in high density areas.

Any one have it set up to get traffic on both devices or must I disable traffic on the IFD 440 and wire the Aera 660 to the GTX345?

And if I have to disable the IFD440 traffic, must I do that on the maint page or disable connector pins?

-------------
Bob
IFD 440
Beech Sierra

Replies:

Posted By: Ibraham
Date Posted: 11 May 2018 at 9:47am

The 660 can also display ADS-B in traffic and weather information via Bluetooth from Garmin’s GDL 39 series, Flight Stream and GTX 345 transponder. T

Posted By: Rocket Man
Date Posted: 11 May 2018 at 3:06pm

Thanks Ibraham.

Thats what I finally did and I got it to work.

I tried to get to the Maint mode but no luck. Wish the install manual was available.

-------------
Bob
IFD 440
Beech Sierra

Posted By: Ibraham
Date Posted: 11 May 2018 at 5:21pm

You can request the install manual form Avidyne, they will send it to you.

To enter the maintenance mode, insert a USB flash drive prior to turning the unit on and it will start in that mode.

Posted By: HenryM
Date Posted: 11 May 2018 at 8:39pm

Aux -> Sys Tab -> Download Logs LSK on the bottom left -> Confirm will cause the IFD to restart in maintenance mode. No USB key needed.

Posted By: Rocket Man
Date Posted: 12 May 2018 at 6:53pm

i found the USB key thing in a remote section of the Pilot's Guide.

But the LSK key procedure is something new to me.

Thanks both

-------------
Bob
IFD 440
Beech Sierra