Foreflight bug with flight plan uploads
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1450
Printed Date: 25 Apr 2024 at 6:46am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Foreflight bug with flight plan uploads
Posted By: oskrypuch
Subject: Foreflight bug with flight plan uploads
Date Posted: 02 Jan 2018 at 3:17pm
|
When you upload a flight plan to the IFD route page from FF, the first airport waypoint is NOT designated as the ORIGIN airport, just a regular waypoint. It means that you can't specify a departure, and it also acts a little differently in a few other ways. I have reported this to Foreflight, they have replicated the bug, and are working on it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You've been copied in on ForeFlight support Hi Orest, This is Phil with ForeFlight again. We have not forgotten you, and we appreciate your patience as we look into this issue. Our avionics connect specialist has reported that he has been able to replicate the issue you describe (just as you said he would), but a quick fix to resolve the issue is not possible. Therefore, we have opened an internal engineering case to investigate it further and fix as able. While we don't have a timeframe for when a fix may be put in place, please know we are working on correcting this. Please let us know if you have further questions or issues. We are here and happy to help! Phil |
Replies:
Posted By: chflyer
Date Posted: 03 Jan 2018 at 9:09am
|
Orest, I think they must have fixed this with just released version 9.5.2. I tried to reproduce the problem at my aircraft today with that release and was unable. The FF route that I entered included a departure, and that departure was not copied to the IFD540, however I was able to add it directly into the origin airport in the IFD without any difficulty. This is probably not a bad thing, because it is always possible that the wind/runway could change requiring a different departure than first entered into FF. But not copying the FF route departure to the IFD could perhaps still be considered an issue. In my example above, the route loaded into the IFD was the origin airport waypoint/origin followed by the first fix after the SID. ------------- Vince |
Posted By: oskrypuch
Date Posted: 03 Jan 2018 at 2:42pm
|
Cool. Will check that. * Orest |
Posted By: teeth6
Date Posted: 19 Mar 2018 at 9:57pm
| I’m able to transfer flight plans from the IFD to FF but when I click “send to panel” I always get an error message. Anyone else see this? |
Posted By: oskrypuch
Date Posted: 19 Mar 2018 at 11:47pm
|
Yes, virtually always see it. Just click send, again. Just about always works on the second attempt. * Orest |
Posted By: teeth6
Date Posted: 20 Mar 2018 at 6:24am
| Cool. Thanks. Never tried the 2nd time |
Posted By: skybum02
Date Posted: 20 Mar 2018 at 7:58am
| Yes, takes two attempts at first load, but works on the first send after that. |
Posted By: George P
Date Posted: 20 Mar 2018 at 10:14am
| That has been my experience too. Just request a transfer again. |
Posted By: Gring
Date Posted: 20 Mar 2018 at 8:16pm
| Same experience here |
Posted By: teeth6
Date Posted: 20 Mar 2018 at 8:32pm
| Weird. I wonder if this is a FF issue or something Avidyne will correct in a future release.? |
Posted By: Ibraham
Date Posted: 20 Mar 2018 at 9:55pm
| Just be aware that the Flight plan will be added to the Routes list in the FMS, where you would need to find it and activate it. You will see a yellow message flashing briefly that it was received. |
Posted By: teeth6
Date Posted: 21 Mar 2018 at 6:53am
|
I had assumed it would be added to the FMS in the active flight plan page. It sounds like it becomes a "saved" flightplan in the routes list like my other saved routes. If this is a one time flight, I'd then have to go back and delete that route from the list, correct? |
Posted By: Gring
Date Posted: 21 Mar 2018 at 9:56am
| Yes, that is exactly how it operates. |
Posted By: AviSteve
Date Posted: 08 May 2018 at 11:26am
We investigated this further in cooperation with Foreflight. The problem has been identified and the solution will be included in an upcoming release of Foreflight. ------------- Steve Lindsley Avidyne Engineering |
teeth6 wrote:Posted By: Gring
Date Posted: 08 May 2018 at 8:01pm
| Do you think you can get ForeFlight to display traffic and weather from the IFDs? |
Posted By: AviSteve
Date Posted: 09 May 2018 at 9:49am
Not sure, but I'll see what I can do. ------------- Steve Lindsley Avidyne Engineering |
Posted By: paulr
Date Posted: 09 May 2018 at 1:21pm
| AviSteve, apropos of this, there's another thread about display of ADS-B wx/traffic on ForeFlight 10 with some useful feedback there. |
Posted By: Ed Trautman
Date Posted: 21 Sep 2018 at 8:00am
|
hi Orest. Is this really fixed? I am relatively new to the IFD 540 but not foreflight, with v10.3. Still happens for me when transferring flight plans. No origin. Ed
|
Posted By: oskrypuch
Date Posted: 21 Sep 2018 at 9:38am
The "no origin", on a flight plan upload to the IFD540 still is not fixed. The origin airport is just a regular waypoint. I was commenting on the flight plan transfer itself, either download or upload. That seems to work now, although you sometimes get the error message the first time you make a request. * Orest |
Posted By: Ed Trautman
Date Posted: 21 Sep 2018 at 5:50pm
|
thanks. I will add my 2cents to the FF fixers. Ed
|